Heat Staking Metal to Plastic

Applications Database

Access helpful pdf Application Notes after a brief registration:
Inserting a piston stop with o-ring into an oil pump assembly
Plastic to metal bonding of beer kegs
Inserting Steel Studs Into A Plastic Tail Light
Heating Brassiere Underwires For Application of Nylon Powder
Inserting A Brass Part Into Plastic
Heating Four Brass Inserts Simultaneously
Inserting Threaded Steel Parts Into Plastic Lawn Chairs
Bonding a Plastic Handle to a Surgical Knife

Overview

When a structural component is produced from a thermoplastic material, it is possible to heat a threaded metal insert to a temperature above the plastic reflow point and press it into the plastic part. There are many types of metal inserts, specially designed for retention strength, produced for this purpose. With the increasing need for lighter, stronger structural components, metal inserts are now frequently used when strong threaded connections are required. Metal to plastic bonding is one of several plastic reflow appli-cations for induction heating. Other processes involving heating plastic to a liquidous state include metal reclaiming and thermoplastic composite manufacturing.

Using Induction

The metal to plastic bonding process requires fast, accurate and repeatable heating to avoid such quality defects as flashing (molten plastic overflow) and burning. Modern induction heating systems quickly heat the inserts from the outside surface, limiting the heat energy to the outer edges where heat is needed to reflow the plastic. Longer heating cycles may result in the softening of the internal threads, especially at the low temperatures needed for heating brass inserts. Heating with induction is reliable, repeatable, non-contact and energy-efficient. Solid state systems, when used in conjunction with temperature sensing and control equipment, are capable of heating very small areas within precise production tolerances.

Typical RF power supplies for metal to plastic bonding range from 1 to 20kW, depending on the parts and application requirements.

Customer Links

These links highlight some of our valued customers using induction in their staking processes

Edison Welding Institute